Dieppe, NB  

506-878-5180 Contact Us
Inventory Search
TO
TO
TO
Search
2017 Mako 184 CC
Boat Details
Year 2017
Length 18 ft 4 in (5.59 meters)
Located in Moncton, NB
Sale Status Active
Number of Engines 1
Horsepower (total) 115 hp
Engine Make: Mercury
Engine Model: EXLPT
Fuel Capacity 53.5 gal
Hull Material Fiberglass
Draft Board/Drive Up 1 ft
Deadrise at Transom 18 °
Beam 8.17 ft
Dry Weight 1,800 lb
Hull ID BUJ93433J617
Convertible Saloon NO
Fuel Tank Count 1
Length Overall 18.33 ft

The compact yet deadly MAKO 184 CC is built tough for fishing and fun, whether you're chasing offshore game or just cruising the islands with the family. Anglers will appreciate the under-gunwale rod storage and 21-gallon baitwell. And families will love the cushioned forward console seat and molded-in swim platforms.
The hull/deck joint is chemically sealed and bonded 360°, plus it's mechanically fastened every 6" (15.2 cm) with stainless steel fasteners. The chop-taming, aggressive Deep V hull allows it to brave rougher conditions with confidence, and the wide beam contributes to safety and stability at rest.

  • Backed by the MAKO® Assurance—the best warranty in the business
  • Foam-injected hull w/1-piece fiberglass stringer grid
  • Hull/deck joint chemically bonded & fastened 360° w/stainless steel fasteners
  • Self-bailing cockpit w/non-skid deck surface
  • Under-gunwale port & starboard rod racks
  • Center console w/analog gauges, electronics mounting surface, stainless steel grab rail, acrylic windscreen & storage
  • 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
  • 2 pedestal helm seats & forward console seat w/21-gal. (79.5 L) livewell
  • Port & starboard bow seating w/64-qt. (60.5 L) insulated fishboxes w/drains below
  • Custom-matched, tandem-axle aluminum trailer w/brakes
Additional Specs
  • Length:18' 4"
  • Beam: 8' 2"
  • Max. recommended HP: 150 HP
  • Fuel capacity: 53.5 gal.
  • Max. person capacity: 5 persons
  • Max. person weight: 965 lbs.
  • Max. weight capacity : 1727 lbs.
  • Transom height at center line: 25"
  • Deadrise: 18 degrees
  • Draft: 12"
  • Approx. hull weight: 1800 lbs.
Standard Features

Comfort, Convenience & Peace of Mind

  • Backed by the MAKO® Assurance—the best warranty in the business
  • NMMA Certified
  • Factory leak tested for hull, plumbing & fitting integrity
  • Stainless steel hardware & fasteners for corrosion resistance

 

Console

  • Forward-console seat w/21-gal. (80 L) baitwell
  • Acrylic windscreen
  • Gauge panel w/analog gauges
  • Heavy-duty electrical switching system w/battery selector switch(es)
  • Battery storage
  • Marine-grade tinned wiring w/submersible connectors
  • 2 drink holders

 

Construction & Exterior

  • 100% composite construction
  • Coosa® Bluewater 100% composite transom core
  • .25" (.64 cm) aluminum backing-plate reinforcement for T-top mounting
  • Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/stainless steel fasteners
  • 1-piece molded fiberglass stringer grid w/integrated transom knee supports
  • Foam-injected stringer grid
  • Marine-grade stainless steel hardware
  • Heavy-duty rub rail & insert
  • Aluminum backing plates for cleats, chocks & hinges
  • Closed-molded hatch covers w/finished undersides & integrated gaskets
  • MAKO® White gelcoat

 

Electrical, Mechanical & Plumbing Systems

  • USCG-compliant navigation lights
  • Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment

 

Interior

  • Port & starboard bow seats w/64-qt. (61 L) fishboxes w/gravity overboard drainage
  • 2 pedestal helm seats w/slide & swivel
  • Self-bailing cockpit
  • 2 gunnel-mounted rod holders
  • Port & starboard under-gunnel rod racks for 4 rods
  • 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
  • Bilge access hatch
  • Four 6" (15.24 cm) polished marine-grade stainless steel cleats
  • Low profile stainless steel bow rails
  • Molded non-skid surfaces throughout
  • Port & starboard molded-in swim platforms
  • Anchor locker
  • Foredeck dodger mounting boss

 

Performance

  • Legendary dry-riding MAKO® hull
  • Aggressive deep V hull design
  • Performance lifting strakes
  • Factory-matched propeller

 

Trailer

  • Aluminum tandem-axle trailer
  • NMMA Certified trailer
  • DOT approved
  • Tandem-axle brakes
  • 13" (33.02 cm) radial tires w/galvanized V5 wheels & galvanized axle
  • Oil bath hubs
  • Leaf spring suspension
  • Heavy-duty winch w/nylon strap & safety strap
  • Stainless steel hardware
  • Galvanized steel components
  • LED lighting
  • PVC loading guides
  • Composite fenders
Disclaimer
* We employ best efforts to present accurate pricing, specifications, features and availability for models shown on this site. On occasion, data transmission errors may produce anomalies in information presented. Photos could show optional accessories not included in the listed price or not available on the actual model in stock. Should you have questions about what you see here, your dealer will be able to confirm correct availability, model content and pricing. Inventory shown is subject to prior sale or transfer to another location.
Call For Price
506-500-0686
Additional Information
Mako Boats Website
Dealer Information
Name Bass Pro Shops Tracker Boat Center MONCTON
Location 1 Promenade Bass Pro Drive
Dieppe, NB E1A 6S5
CA
Phone 506-500-0686
Email: ijones@basspro.com

506-878-5180
1 Promenade Bass Pro Drive
Dieppe, NB E1A 6S5
Mon - Fri
10:00 AM
-
9:00 PM
Sat
9:00 AM
-
9:00 PM
Sun
10:00 AM
-
6:00 PM
Join Us